Chapter 5: Lists
Lists are useful because they emphasize certain information in regular
text. When you see a list of three or four items strung out vertically on
the page, rather than in normal paragraph format, you naturally notice it
more and are likely to pay more attention to it. Certain types of lists
also make for easier reading. For example, in instructions, it is a big
help for each step to be numbered and separate from the preceding or
following steps. Lists also create more white space and spread out the text
so that pages don't seem like solid walls of words.
Like headings, the various types of lists are an important feature of
professional technical writing: they help readers understand, remember, and
review key points; they help readers follow a sequence of actions or
events; and they break up long stretches of straight text.
Your task for this chapter is to learn about the different types of lists
and their uses and to learn the specific format and style for lists used in
this technical writing course.
Note: Students enrolled in the online version of TCM1603 at Austin
Community College, please take the reading quiz
on this chapter. (Anybody else is welcome to try it as well.)
Lists: General Guidelines
In this course, we use a specific style of lists. This list style is
standard, required format in this course. If you want to use a different
style, get with your instructor.
- Use lists to highlight or emphasize text or to enumerate or make for
easier reference.
- Use exactly the spacing, indentation, punctuation, and caps style shown
in the following discussion and illustrations.
- Make list items parallel in phrasing.
- Make sure that each item in the list reads grammatically with the
lead-in.
- Use a lead-in to introduce the list items, to indicate the meaning or
purpose of the list (and punctuate it with a colon).
- Never use headings as lead-ins for lists.
- Avoid overusing lists; using too many lists destroys their
effectiveness.
- Use similar types of lists consistently in similar text in the same
document.
Guidelines for Specific Types of Lists
It's difficult to state guidelines on choosing between the various kinds of
lists, but here's a stab at it:
- Most importantly, use numbered lists for items that are in a
required order (such as step-by-step instructions) or for items that must
be referred to by item number. Use bulleted lists for items that
are in no required order.
- With in-sentence lists, there are no conventions when to use letters
(a), (b), and so on, as opposed to numbers (1), (2), and so on. If you are
in a numbered list and need a sublist, use letters, to contrast with the
numbers. Otherwise, there really seem to be no widely agreed-upon
guidelines--just be consistent!
- Use vertical lists as opposed to in-sentence lists when you want the
emphasis provided by the vertical presentation. In-sentence lists provide
only minimal emphasis; vertical lists provide much more.
- Avoid using in-sentence lists when there are more than 4 or 5 items;
use a vertical format instead.
- Within an individual report, use in-sentence lists and vertical lists
consistently for similar situations. For example, if you have topic
overviews for each section of a report, use in-sentence or vertical lists
for the overview--but don't mix them for that particular use.
Common Problems with Lists
Problems with lists usually include the following:
- Mix-up between numbered and bulleted lists
- Lack of parallel phrasing in the list items
- Use of single parentheses on the list-item number or letter
- Run-over lines not aligned with the text of list items
- Lack of a strong lead-in sentence introducing list items, and lack of a
colon to punctuation lead-ins
- Inconsistent caps style in list items
- Unnecessary punctuation of list items
- Inconsistent use of lists in similar text
- Lists that have too many items and need to be subdivided or
consolidated
Format for Lists
Use the following for specific details on the capitalization, typography
(bold, underlining, different fonts, different types sizes), and spacing
for each type of list.
In-Sentence Lists
Use these guidelines for in-sentence lists:
- Use a colon to introduce the list items only if a complete
sentence precedes the list. In this problem version, the colon breaks right
into the middle of a sentence (how dare it!):
Problem: For this project, you need: tape, scissors, and
white-out.
Revision: For this project, you need tape, scissors, and
white-out.
- Use both opening and closing parentheses on the list item numbers or letters:
(a) item, (b) item, etc.
- Use either regular Arabic numbers or lowercase letters within the
parentheses, but use them consistently. (Do not punctuate either with
periods). Use lowercase for the text of in-sentence lists items, except when
regular capitalization rules require caps.
- Punctuate the list items with commas if they are not complete sentences; with
semicolons, if they are complete sentences.
- Use the same spacing for in-sentence lists as in regular non-list text.
- Whenever possible, make the in-sentence list occur at the end of the
sentence. Never place an in-sentence list introduced by a colon anywhere but
at the end of the sentence, as in this example:
Problem: The following items: tape, scissors, and white-out
are needed for this project.
Revision: The following items are needed for this project: tape,
scissors, and white-out.
Figure 5-1. Examples of in-sentence lists.
Simple Vertical Lists
Use these guidelines for simple vertical lists:
- Introduce the list with a lead-in sentence (the lead-in need not be a
complete sentence; the list items can complete the lead-in). Punctuate the
lead-in with a colon.
- Use simple vertical lists when the list items do not need to be
emphasized, and are listed vertically merely for ease of reading.
- Use sentence-style capitalization on list items.
- Begin run-over lines under the text of the list item, not the regular
left margin; singlespace list items that are two to three lines long (but
use doublespace for lengthy list items).
- Use regular doublespacing between the surrounding text and the list;
doublespace between list items.
- Indent the list items 3 to 5 spaces (start the item on the third or
fifth column).
- Punctuate list items only if they are complete sentences or verb
phrases that complete the sentence begun by the lead-in (and use periods in
these two cases).
- Watch out for lists with more than 6 or 8 list items; for long lists,
look for ways to subdivide or consolidate. Avoid single-item lists.
- When possible, omit articles (a, an, the) from the
beginning of list items.
Figure 5-2. Example of a simple vertical list (no
numbers or bullets).
Bulleted Vertical Lists
Use these guidelines for bulleted vertical lists:
- Introduce the list with a lead-in sentence (the lead-in need not be a
complete sentence; the list items can complete the lead-in). Punctuate the
lead-in sentence with a colon.
- Use bulleted lists when the list items are in no necessary order and
when you want to emphasize the items in the list.
- Use asterisks or hyphens if you have no access to an actual bullet.
- Use sentence-style capitalization on list items.
- Begin run-over lines under the text of the list item, not the bullet;
singlespace list items that are two to three lines long (but use
doublespace for lengthy list items).
- Use regular doublespacing between the surrounding text and the bulleted
list; doublespace between list items.
- Indent the list items 3 to 5 spaces (start the bullet on the third or
fifth column). Leave 1 space between the bullet and the start of the list
item.
- Punctuate bulleted list items only if they are complete sentences or
verb phrases that complete the sentence begun by the lead-in (and use
periods in these two cases).
- Watch out for bulleted lists with more than 6 or 8 list items; for long
bulleted lists, look for ways to subdivide or consolidate. Avoid
single-item bulleted lists.
- When possible, omit articles (a, an, the) from the
beginning of list items.
Figure 5-3. Example of a bulleted vertical list
(items not in any required order).
Numbered Vertical Lists
Use these guidelines for numbered vertical lists:
- Introduce the list with a lead-in sentence (the lead-in need not be a
complete sentence; the list items can complete the lead-in). Punctuate the
lead-in sentence with a colon.
- Use numbered lists when the list items are in a required order (for
example, chronological).
- Type the number followed by a period; do not use parentheses on the
number.
- Use sentence-style capitalization on list items.
- Begin run-over lines under the text of the list item, not the number;
singlespace list items that are two to three lines long (but use
doublespace for lengthy list items).
- Use regular doublespacing between the surrounding text and the numbered
list; doublespace between list items.
- Indent the list items 3 to 5 spaces (start the number on the third or
fifth column). Leave 1 space between the period after the number and the
start of the list item.
- Punctuate numbered list items only if they are complete sentences or
verb phrases that complete the sentence begun by the lead-in (and use
periods in these two cases).
- Watch out for numbered lists with more than 8 or 10 list items; for
long numbered lists, look for ways to subdivide or consolidate. Avoid
single-item numbered lists.
- When possible, omit articles (a, an, the) from the
beginning of list items.
Figure 5-4. Example of a numbered vertical list
(items are in a required order).
Two-Column Lists
Use these guidelines for two-column lists:
- Use two-column lists when you have a series of paired items, for
example, terms and definitions.
- Introduce the list with a lead-in sentence that is a complete
sentence. Punctuate the lead-in sentence with a colon.
- Column headings are optional; if used, align them to the left margin of
the text of the columns.
- Indent the left column 3 to 5 spaces; leave at least 3 spaces between
the right margin of the left column and the left margin of the right
column.
- Use sentence-style capitalization for both columns.
- Punctuate items in the columns only if they are complete sentences.
- Doublespace between the list items; but singlespace within the items.
- Left-align both columns.
- When possible, omit articles (a, an, the) from the
beginning of list items.
Figure 5-5. Example of a two-column list (pairs of
list items). Not illustrated here, column headings are often used to
indicate the contents of the two columns (for example, here it might be
"Term" as the heading for the column 1 and "Definition"
for column 2).
Lists with Run-In Headings
One last little variation on lists is the vertical list with run-in
headings or labels at the beginning of the items. This format is used
extensively in this book. It's like another way of doing a two-column
list. Two-column lists can be difficult--you have to get the spacing right
between the two columns and reformat every run-over line in the second
column.
You can use bold or italics for the actual run-in heading (italics is used
in the figure).
Figure 5-6. Example of a vertical list with run-in
headings. Very useful for indicating the contents of each item in a lengthy
vertical list when a two-column list is not quite right for the
situation.
Other Formatting Issues
Here are some additional points to consider concerning lists.
Singlespaced Text. All of the examples and discussion in this
chapter are based on doublespaced text. For singlespaced text, use your
document-design "eye" to decide on spacing. Leave either one or
two blank lines between running text and lists--depending on what looks best
to you. (And, of course, both running text and the text of the lists would
be singlespaced.)
One area that is wide open for individual judgment is whether to add space
between vertical list items (loose format) or to keep them singlespaced
(compact format). Again, use your document-design eye on this. If the items
are several lines each and if there are numerous items, the loose format
may be more readable. Whichever you use, be consistent with it.
Designing Your Own Lists. Once you start looking around at how
lists are formatted in different publications, you'll notice a lot of
variability. There is no one "right" design for each type of
list. Indentation, capitalization, spacing practices all vary
enormously. Use the formats shown in this chapter for this technical
writing class. If you want to some other format, get with your instructor.
Return to the table of contents for the TCM1603 Course Guide
(the online textbook for Austin Community College's online
technical writing course).
This information is owned and maintained by David A. McMurrey. For
information on use, customization, or copies, e-mail
davidm@austin.cc.tx.us or call (512) 476-4949.